Nik Ivanov has released plans for a low-cost, 3D-printable rover called Watney which features cheap, yellow Chinese DC motors inside a pretty lovely 3D-printed chassis and case. It’s all run off a Raspberry Pi Zero W and you can download…
Please note: these types of lasers can damage your eyes – so please, use appropriate eye-protection. Tucker Shannon has taken a Raspberry Pi Zero and two stepper motor driver boards and then mounted a 5mw, 405nm laser pointer on top. He’s…
Al Bencomo has created this wonderful 3D-printed robot that can overcome obstacles by changing the shape of its wheels. FRILLER (FRILL Explorer Robot) uses a Raspberry Pi 3 with Android Things OS to control motors connected via an Adafruit Motor HAT.…
For those of you who don’t follow cinema avidly, I should first of all say: There’s a new Star Wars movie out. This one’s called ‘Solo‘ and is about the early day of everyone’s favourite smuggler Han Solo. By all…
Nord Projects Lantern “transforms any surface into an ambient, smart interface.” It uses the Android Things OS and scripts written by Nord Projects to project different images onto surfaces, depending on the orientation of the lamp, which is detected by an onboard accelerometer. They…
Michael Teeuw has done a fantastic job on this interactive control panel for his son, Enzo. It uses a combination of Arduino and Raspberry Pi along with several other components including replacing LEDs inside buttons with Neopixels, an Adafruit Speaker…
Just a quick one this evening. Here’s a nice 3D printed enclosure for the Raspberry Pi from Paul-Louis Ageneau. It features two bays for hard drives that slide in, together with USB adapters. USB cables then connect the drives up…
I do like a nice music-and-tech project and this one is pretty special. Called the Nsynth, this tablet-with-controls device is powered by a Raspberry Pi and accepts MIDI inputs which it then feeds through an openFrameworks app. The MIDI samples…
Max Kern has taken a Raspberry Pi Zero W, a camera module and some power circuitry and sensors and created a first-person viewpoint wheeled security drone, the ZeroBot Pro, an upgrade from the previous ZeroBot (without the Pro!). The software…
Instructables user ‘dearner’ has taken a Raspberry Pi, four 32×32 RGB LED matrix boards, an Adafruit RGB matrix HAT, a good extra power supply for the matrices and some smaller parts and created a long LED display. He’s then created…
