In what I think is a first for the Compute Module, French company CALAO Systems has just announced the launch of the PInBALL board – a platform for industrial Raspberry Pi users. It has the following specs:
- SoC / Memory / Storage – Via Raspberry Pi Compute Module – Broadcom BCM2835, 512MB RAM, 4GB eMMC Flash.
- Other Storage – 1x 2Kb I²C EEPROM with EUI-48 MAC Address & 128 bit Serial Number (AT24MAC402).
- Video Output – 1x HDMI Out, 1x CVBS Out (BCM2835)
- Audio Output – 1x HDMI, 2x S/PDIF Out / Optical & RCA (WM8804),
- Connectivity – 1x Fast Ethernet (LAN9514), 1x Micro-SIM Socket
- USB – 2x USB 2.0 Host (LAN9514), 1x USB Device,
- Serial Ports – 2x TTL Serial Ports (BCM2835), 2x TTL Serial Ports (MAX3109)*
- Other I/Os
- 1x CAN Bus (MCP2515)*
- 2x MiPi DSI*
- 2x MiPi CSI*
- 3x Industrial Inputs (Téléinfo, Interface S0 or Standard Opto-isolated , 24VDC Output)*
- 3x Industrial Outputs (1x Relay COM / NO or NC, 2x Isolated Outputs, 24VDC Input)*
- Sensors – 1x Humidity & Temperature Sensor (Si7020)*
- Expansions
- 1x Mini PCIe Slot (USB 2.0 only, no PCIe)*
- 1x Mini PCIe Slot (I2C, SPI, UART, USB & GPIOs)*
- x KNX BAOS 820 module (KNX/TP1)*
- Debugging – 1x JTAG port for BCM2835 (ARM11 or VideoCore GPU)
- Misc – 1x RTC (DS3232) with BR1632A lithium battery, power/reset/user push buttons & LEDs,
- Power Supply
- Main: 12VDC / 2A (9-36 VAC/VDC),
- Auxiliary Power Input: 9-36 VAC/VDC for 2nd power supply or external battery charger system,
- Temperature Range – -20°C to +70°C
- Dimensions – 100 x 120 mm
You can read a good summary over at CNX Software and you can view CALAO’s wiki pages on the board here.
Oh… the Compute Module is underneath 🙂
