{"id":4661,"date":"2013-06-15T20:20:14","date_gmt":"2013-06-15T20:20:14","guid":{"rendered":"http:\/\/178.62.14.192\/?p=4661"},"modified":"2013-06-15T20:20:14","modified_gmt":"2013-06-15T20:20:14","slug":"accessory-watch-new-boards-for-the-raspberrypi-ahoy","status":"publish","type":"post","link":"https:\/\/www.recantha.co.uk\/blog\/?p=4661","title":{"rendered":"Accessory watch: New boards for the #RaspberryPi ahoy!"},"content":{"rendered":"

Ahoy… we’re not at sea, Mike! Anyway…<\/p>\n

I always keep an eye out for new boards and here are a couple I’ve just spotted.<\/p>\n

GeekRoo All-in-One Breakout Board – ModMyPi – \u00a314.99<\/a><\/strong><\/p>\n

ModMyPi | GeekRoo All-In-One Breakout Board<\/a><\/p>\n

The GeekRoo All-In-One Raspberry Pi Breakout Board is one of the most advanced prototyping breakout boards available to date! This board plugs directly in to the GPIO pins on the Raspberry Pi, and then extends the GPIO pins through itself, giving you the ability access the GPIO pins (without using the board), and hence ‘stack’ boards up!<\/p>\n

Simultaneously, the board breaks out the 3.3V GPIO pins to a separate stack (Picture 1.), breaks the SPI pins in two groups, in addition breaking out the I2C pins, with a jumper setting to enable both 3.3V and 5V operation (Picture 2.). The board also features an external power source Input (Picture 3.) with 8-Way Output which, provided with further current amplification using a Darlington Driver IC (pre-soldered), can supply up to 50V, 600mA for each output. It therefore has more than enough power to directly drive relays, 1W high-power LED, servos, stepper motors, etc.<\/p>\n

Finally, the board also features a power LED and 2A fuse, so you know when it’s on, and your Raspberry Pi is protected! It even has space to add a Mini Breadboard so you can really customise this board to suit whatever project you’re working on, without permanently soldering it all together.<\/p><\/blockquote>\n

GeekRoo Cockatoo RTC Clock Board – ModMyPi – \u00a317.99<\/a><\/strong><\/p>\n

ModMyPi | GeekRoo All-In-One Breakout Board<\/a><\/p>\n

\n

\n

The GeekRoo Clockatoo Raspberry Pi Breakout Board allows you to Transform your Raspberry Pi in to a Fully Functioning Clock! The board features a coin-battery powered real time clock (RTC) module, in addition to an LED screen that can be mounted both horizontally and vertically across the board, which turns you Pi into a beautiful clock. It also has an integrated programmable buzzer so you can use it as an alarm, and reset switch!<\/p>\n

The board comes pre-assembled, so there’s no soldering, there’s a full set up guide available from on the GeekRoo Wiki, and the source drivers are available from the GeekRoo Github. All parts come in GeekRoo’s super stylish component tin, so it’s the perfect gift for any Raspberry Pi lover.<\/p>\n<\/blockquote>\n

\n","protected":false},"excerpt":{"rendered":"

Ahoy… we’re not at sea, Mike! Anyway… I always keep an eye out for new boards and here are a couple I’ve just spotted. GeekRoo All-in-One Breakout Board – ModMyPi – \u00a314.99 The GeekRoo All-In-One Raspberry Pi Breakout Board is…<\/p>\n

Read more →<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2},"jetpack_post_was_ever_published":false},"categories":[20,47],"tags":[],"class_list":["post-4661","post","type-post","status-publish","format-standard","hentry","category-gpio-boards","category-rpi-shopping"],"yoast_head":"\nAccessory watch: New boards for the #RaspberryPi ahoy! - Raspberry Pi Pod<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.recantha.co.uk\/blog\/?p=4661\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Accessory watch: New boards for the #RaspberryPi ahoy! - Raspberry Pi Pod\" \/>\n<meta property=\"og:description\" content=\"Ahoy… we’re not at sea, Mike! Anyway… I always keep an eye out for new boards and here are a couple I’ve just spotted. GeekRoo All-in-One Breakout Board – ModMyPi – \u00a314.99 The GeekRoo All-In-One Raspberry Pi Breakout Board is…Read more →\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.recantha.co.uk\/blog\/?p=4661\" \/>\n<meta property=\"og:site_name\" content=\"Raspberry Pi Pod\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/recantha\/\" \/>\n<meta property=\"article:published_time\" content=\"2013-06-15T20:20:14+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2013\/06\/geerkroo-all-in-one-raspberry-pi-breakout-board-0-498x4981.jpg\" \/>\n<meta name=\"author\" content=\"Michael Horne\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@recantha\" \/>\n<meta name=\"twitter:site\" content=\"@recantha\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Michael Horne\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?p=4661#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?p=4661\"},\"author\":{\"name\":\"Michael Horne\",\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/c27c4ef2ee1c18b130f1fcd5dcdbb263\"},\"headline\":\"Accessory watch: New boards for the #RaspberryPi ahoy!\",\"datePublished\":\"2013-06-15T20:20:14+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?p=4661\"},\"wordCount\":380,\"commentCount\":2,\"publisher\":{\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/#organization\"},\"articleSection\":[\"GPIO boards\",\"Shopping\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?p=4661#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?p=4661\",\"url\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?p=4661\",\"name\":\"Accessory watch: New boards for the #RaspberryPi ahoy! - Raspberry Pi Pod\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/#website\"},\"datePublished\":\"2013-06-15T20:20:14+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?p=4661#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?p=4661\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?p=4661#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Accessory watch: New boards for the #RaspberryPi ahoy!\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/#website\",\"url\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/\",\"name\":\"Raspberry Pi Pod\",\"description\":\"Experiences with the Raspberry Pi micro computer and microcontroller\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/#organization\",\"name\":\"Raspberry Pi Pod\",\"url\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/i0.wp.com\\\/www.recantha.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2016\\\/03\\\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"contentUrl\":\"https:\\\/\\\/i0.wp.com\\\/www.recantha.co.uk\\\/blog\\\/wp-content\\\/uploads\\\/2016\\\/03\\\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"width\":800,\"height\":337,\"caption\":\"Raspberry Pi Pod\"},\"image\":{\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/recantha\\\/\",\"https:\\\/\\\/x.com\\\/recantha\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/recantha\\\/\",\"https:\\\/\\\/www.youtube.com\\\/channel\\\/UCK4F9blabxzmk8Inzhs8tpg\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/#\\\/schema\\\/person\\\/c27c4ef2ee1c18b130f1fcd5dcdbb263\",\"name\":\"Michael Horne\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"caption\":\"Michael Horne\"},\"url\":\"https:\\\/\\\/www.recantha.co.uk\\\/blog\\\/?author=1\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Accessory watch: New boards for the #RaspberryPi ahoy! - Raspberry Pi Pod","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.recantha.co.uk\/blog\/?p=4661","og_locale":"en_US","og_type":"article","og_title":"Accessory watch: New boards for the #RaspberryPi ahoy! - Raspberry Pi Pod","og_description":"Ahoy… we’re not at sea, Mike! Anyway… I always keep an eye out for new boards and here are a couple I’ve just spotted. GeekRoo All-in-One Breakout Board – ModMyPi – \u00a314.99 The GeekRoo All-In-One Raspberry Pi Breakout Board is…Read more →","og_url":"https:\/\/www.recantha.co.uk\/blog\/?p=4661","og_site_name":"Raspberry Pi Pod","article_publisher":"https:\/\/www.facebook.com\/recantha\/","article_published_time":"2013-06-15T20:20:14+00:00","og_image":[{"url":"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2013\/06\/geerkroo-all-in-one-raspberry-pi-breakout-board-0-498x4981.jpg","type":"","width":"","height":""}],"author":"Michael Horne","twitter_card":"summary_large_image","twitter_creator":"@recantha","twitter_site":"@recantha","twitter_misc":{"Written by":"Michael Horne","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=4661#article","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=4661"},"author":{"name":"Michael Horne","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263"},"headline":"Accessory watch: New boards for the #RaspberryPi ahoy!","datePublished":"2013-06-15T20:20:14+00:00","mainEntityOfPage":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=4661"},"wordCount":380,"commentCount":2,"publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"articleSection":["GPIO boards","Shopping"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.recantha.co.uk\/blog\/?p=4661#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=4661","url":"https:\/\/www.recantha.co.uk\/blog\/?p=4661","name":"Accessory watch: New boards for the #RaspberryPi ahoy! - Raspberry Pi Pod","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#website"},"datePublished":"2013-06-15T20:20:14+00:00","breadcrumb":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=4661#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.recantha.co.uk\/blog\/?p=4661"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=4661#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.recantha.co.uk\/blog"},{"@type":"ListItem","position":2,"name":"Accessory watch: New boards for the #RaspberryPi ahoy!"}]},{"@type":"WebSite","@id":"https:\/\/www.recantha.co.uk\/blog\/#website","url":"https:\/\/www.recantha.co.uk\/blog\/","name":"Raspberry Pi Pod","description":"Experiences with the Raspberry Pi micro computer and microcontroller","publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.recantha.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.recantha.co.uk\/blog\/#organization","name":"Raspberry Pi Pod","url":"https:\/\/www.recantha.co.uk\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","width":800,"height":337,"caption":"Raspberry Pi Pod"},"image":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/recantha\/","https:\/\/x.com\/recantha","https:\/\/www.linkedin.com\/in\/recantha\/","https:\/\/www.youtube.com\/channel\/UCK4F9blabxzmk8Inzhs8tpg"]},{"@type":"Person","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263","name":"Michael Horne","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","caption":"Michael Horne"},"url":"https:\/\/www.recantha.co.uk\/blog\/?author=1"}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p2RsaV-1db","jetpack-related-posts":[{"id":8854,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=8854","url_meta":{"origin":4661,"position":0},"title":"RasPi.TV launches new product range for the #RaspberryPi","author":"Michael Horne","date":"21 March 2014","format":false,"excerpt":"Alex Eames, over at RasPi.TV, has today launched three products for the Raspberry Pi market under the RasPiO label. They are: A port labels board (similar to other ones but nicely done) - it slips over the top of your GPIO pins to act as a handy reference. The RasPiO\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/cdn.shopify.com\/s\/files\/1\/0181\/3455\/products\/RasPiO-Port-Label-cutout-700_compact.jpg?resize=350%2C200","width":350,"height":200},"classes":[]},{"id":9297,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=9297","url_meta":{"origin":4661,"position":1},"title":"RasPiO Breakout Pro – a #RaspberryPi add-on board that protects your Pi","author":"Michael Horne","date":"11 April 2014","format":false,"excerpt":"Alex Eames has done a great video in which he explains how the new RasPiO Breakout Pro protects the Pi. It has resistors for protecting the Pi from excessive amp draw and diodes to protect the Pi should you connect up an over-voltage input. It's a great board the fits\u2026","rel":"","context":"In "GPIO boards"","block_context":{"text":"GPIO boards","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=20"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/rasp.io\/wp-content\/uploads\/2014\/02\/RasPiO-Breakout-Pro-on-pi-700.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/rasp.io\/wp-content\/uploads\/2014\/02\/RasPiO-Breakout-Pro-on-pi-700.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/rasp.io\/wp-content\/uploads\/2014\/02\/RasPiO-Breakout-Pro-on-pi-700.jpg?resize=525%2C300 1.5x, https:\/\/i0.wp.com\/rasp.io\/wp-content\/uploads\/2014\/02\/RasPiO-Breakout-Pro-on-pi-700.jpg?resize=700%2C400 2x"},"classes":[]},{"id":1550,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=1550","url_meta":{"origin":4661,"position":2},"title":"Proto-Plate #RaspberryPi Breakout Board","author":"Michael Horne","date":"27 January 2013","format":false,"excerpt":"A few people at the MK Raspberry Jam were asking today about a board that plugs into the Pi's GPIO pins that both myself and Daniel Bull are using. Well, here's a link to an eBay lot currently selling these boards: Proto-Plate Raspberry Pi Breakout Proto Board I2C SPI UART\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":2529,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=2529","url_meta":{"origin":4661,"position":3},"title":"Raspberry Pi running 4 5V stepper motors from GPIO","author":"Michael Horne","date":"28 February 2013","format":false,"excerpt":"I've been playing around with some stepper motors with driver boards that I bought\u00a0from eBay. They have a lot of potential and I'm planning to use them on an astronomy project... but more on that later. The motors were \u00a31.66 each including postage. Not the fastest delivery ever but then\u2026","rel":"","context":"In "GPIO boards"","block_context":{"text":"GPIO boards","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=20"},"img":{"alt_text":"a5146d48-6ea5-4935-8284-ee63545f6aad","src":"\/blog\/wp-content\/uploads\/2013\/02\/a5146d48-6ea5-4935-8284-ee63545f6aad1-300x291.jpg","width":350,"height":200},"classes":[]},{"id":16437,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=16437","url_meta":{"origin":4661,"position":4},"title":"4tronix seeks to save your Raspberry Pi GPIO pins with this intercept board","author":"Michael Horne","date":"21 February 2017","format":false,"excerpt":"4tronix have just announced the availability of a board that will allow you to use\u00a0your Raspberry Pi's spare GPIO pins when using a HAT. For a while, several boards, such as the SenseHAT, have hogged the entire GPIO when they're just using a few pins. Now, you can get access\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/02\/gpio-intercept.jpg?fit=800%2C600&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/02\/gpio-intercept.jpg?fit=800%2C600&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/02\/gpio-intercept.jpg?fit=800%2C600&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/02\/gpio-intercept.jpg?fit=800%2C600&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":21011,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=21011","url_meta":{"origin":4661,"position":5},"title":"Taking the Cytron Maker Pi Pico out for a spin with the Raspberry Pi Pico","author":"Michael Horne","date":"17 April 2021","format":false,"excerpt":"Tony Goodhew has been in touch about some experiments he has run on the new, low-cost Maker Pi Pico from Cytron. TL;DR - here's the Instructable. In the UK, the Maker Pi Pico is available from The Pi Hut (also as a version without the Pico pre-soldered, but with header\u2026","rel":"","context":"In "Geeky Techiness"","block_context":{"text":"Geeky Techiness","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=22"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2021\/04\/FY1JLWQKNG1CJTD.jpg?fit=1024%2C456&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2021\/04\/FY1JLWQKNG1CJTD.jpg?fit=1024%2C456&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2021\/04\/FY1JLWQKNG1CJTD.jpg?fit=1024%2C456&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2021\/04\/FY1JLWQKNG1CJTD.jpg?fit=1024%2C456&ssl=1&resize=700%2C400 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/4661","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=4661"}],"version-history":[{"count":0,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/4661\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=4661"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=4661"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=4661"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}