{"id":3921,"date":"2013-05-03T13:51:16","date_gmt":"2013-05-03T13:51:16","guid":{"rendered":"http:\/\/178.62.14.192\/?p=3921"},"modified":"2013-05-03T13:51:16","modified_gmt":"2013-05-03T13:51:16","slug":"displaying-system-information-and-overclocking-the-raspberrypi","status":"publish","type":"post","link":"https:\/\/www.recantha.co.uk\/blog\/?p=3921","title":{"rendered":"Displaying System Information and Overclocking the #RaspberryPi"},"content":{"rendered":"

Some nice little snippets of command line courtesy of A Slice of Raspberry Pi<\/a>.<\/p>\n

To find out the clock speed of the ARM processor type “vcgencmd measure_clock arm” at the command line prompt and press\u00a0<\/span>Enter<\/span><\/strong>:<\/span>

pi@raspberrypi\u00a0<\/span>~ $<\/span>\u00a0vcgencmd measure_clock arm_<\/span><\/span>

This should return a result similar to the following, which in my case shows that the ARM processor is running at 700 MHz (700,000,000 Hz):<\/span>

frequency(45)=700000000<\/span><\/span>

You can also measure your system’s core frequency by typing “vcgencmd measure_clock core” at the command line prompt and press\u00a0<\/span>Enter<\/span><\/strong>:<\/span>

pi@raspberrypi\u00a0<\/span>~ $<\/span>\u00a0vcgencmd measure_clock core_<\/span><\/span>

This should return a result similar to the following, which in my case shows that the system core is running at 250 MHz (250,000,000 Hz):<\/span>

frequency(1)=250000000<\/span><\/span>

To measure the voltage your system is running at type “vcgencmd measure_volts” at the command line prompt and press\u00a0<\/span>Enter<\/span><\/strong>:<\/span>

pi@raspberrypi\u00a0<\/span>~ $<\/span>\u00a0vcgencmd measure_volts_<\/span><\/span>

This should return a result similar to the following, which in my case shows that the system is running at 1.20 volts:<\/span>

volt=1.20V<\/span><\/span>

Finally you can measure your system’s core temperature by typing “vcgencmd measure_temp” at the command line prompt and press\u00a0<\/span>Enter<\/span><\/strong>:<\/span>

pi@raspberrypi\u00a0<\/span>~ $<\/span>\u00a0vcgencmd measure_temp_<\/span><\/span>

This should return a result similar to the following, which in my case shows that the system is running at at temperature of 48.2 deg C:<\/span>

temp=48.2’C<\/span><\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

Some nice little snippets of command line courtesy of A Slice of Raspberry Pi. To find out the clock speed of the ARM processor type “vcgencmd measure_clock arm” at the command line prompt and press\u00a0Enter:pi@raspberrypi\u00a0~ $\u00a0vcgencmd measure_clock arm_This should return…<\/p>\n

Read more →<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[1],"tags":[],"class_list":["post-3921","post","type-post","status-publish","format-standard","hentry","category-uncategorized"],"yoast_head":"\nDisplaying System Information and Overclocking the #RaspberryPi - Raspberry Pi Pod<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.recantha.co.uk\/blog\/?p=3921\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Displaying System Information and Overclocking the #RaspberryPi - Raspberry Pi Pod\" \/>\n<meta property=\"og:description\" content=\"Some nice little snippets of command line courtesy of A Slice of Raspberry Pi. To find out the clock speed of the ARM processor type “vcgencmd measure_clock arm” at the command line prompt and press\u00a0Enter:pi@raspberrypi\u00a0~ $\u00a0vcgencmd measure_clock arm_This should return…Read more →\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.recantha.co.uk\/blog\/?p=3921\" \/>\n<meta property=\"og:site_name\" content=\"Raspberry Pi Pod\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/recantha\/\" \/>\n<meta property=\"article:published_time\" content=\"2013-05-03T13:51:16+00:00\" \/>\n<meta name=\"author\" content=\"Michael Horne\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@recantha\" \/>\n<meta name=\"twitter:site\" content=\"@recantha\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Michael Horne\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=3921#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=3921\"},\"author\":{\"name\":\"Michael Horne\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263\"},\"headline\":\"Displaying System Information and Overclocking the #RaspberryPi\",\"datePublished\":\"2013-05-03T13:51:16+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=3921\"},\"wordCount\":230,\"commentCount\":1,\"publisher\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.recantha.co.uk\/blog\/?p=3921#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=3921\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/?p=3921\",\"name\":\"Displaying System Information and Overclocking the #RaspberryPi - Raspberry Pi Pod\",\"isPartOf\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#website\"},\"datePublished\":\"2013-05-03T13:51:16+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=3921#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.recantha.co.uk\/blog\/?p=3921\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=3921#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.recantha.co.uk\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Displaying System Information and Overclocking the #RaspberryPi\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#website\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/\",\"name\":\"Raspberry Pi Pod\",\"description\":\"Experiences with the Raspberry Pi micro computer and microcontroller\",\"publisher\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.recantha.co.uk\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\",\"name\":\"Raspberry Pi Pod\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"contentUrl\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"width\":800,\"height\":337,\"caption\":\"Raspberry Pi Pod\"},\"image\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/recantha\/\",\"https:\/\/x.com\/recantha\",\"https:\/\/www.linkedin.com\/in\/recantha\/\",\"https:\/\/www.youtube.com\/channel\/UCK4F9blabxzmk8Inzhs8tpg\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263\",\"name\":\"Michael Horne\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"caption\":\"Michael Horne\"},\"url\":\"https:\/\/www.recantha.co.uk\/blog\/?author=1\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Displaying System Information and Overclocking the #RaspberryPi - Raspberry Pi Pod","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.recantha.co.uk\/blog\/?p=3921","og_locale":"en_US","og_type":"article","og_title":"Displaying System Information and Overclocking the #RaspberryPi - Raspberry Pi Pod","og_description":"Some nice little snippets of command line courtesy of A Slice of Raspberry Pi. To find out the clock speed of the ARM processor type “vcgencmd measure_clock arm” at the command line prompt and press\u00a0Enter:pi@raspberrypi\u00a0~ $\u00a0vcgencmd measure_clock arm_This should return…Read more →","og_url":"https:\/\/www.recantha.co.uk\/blog\/?p=3921","og_site_name":"Raspberry Pi Pod","article_publisher":"https:\/\/www.facebook.com\/recantha\/","article_published_time":"2013-05-03T13:51:16+00:00","author":"Michael Horne","twitter_card":"summary_large_image","twitter_creator":"@recantha","twitter_site":"@recantha","twitter_misc":{"Written by":"Michael Horne","Est. reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=3921#article","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=3921"},"author":{"name":"Michael Horne","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263"},"headline":"Displaying System Information and Overclocking the #RaspberryPi","datePublished":"2013-05-03T13:51:16+00:00","mainEntityOfPage":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=3921"},"wordCount":230,"commentCount":1,"publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.recantha.co.uk\/blog\/?p=3921#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=3921","url":"https:\/\/www.recantha.co.uk\/blog\/?p=3921","name":"Displaying System Information and Overclocking the #RaspberryPi - Raspberry Pi Pod","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#website"},"datePublished":"2013-05-03T13:51:16+00:00","breadcrumb":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=3921#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.recantha.co.uk\/blog\/?p=3921"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=3921#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.recantha.co.uk\/blog"},{"@type":"ListItem","position":2,"name":"Displaying System Information and Overclocking the #RaspberryPi"}]},{"@type":"WebSite","@id":"https:\/\/www.recantha.co.uk\/blog\/#website","url":"https:\/\/www.recantha.co.uk\/blog\/","name":"Raspberry Pi Pod","description":"Experiences with the Raspberry Pi micro computer and microcontroller","publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.recantha.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.recantha.co.uk\/blog\/#organization","name":"Raspberry Pi Pod","url":"https:\/\/www.recantha.co.uk\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","width":800,"height":337,"caption":"Raspberry Pi Pod"},"image":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/recantha\/","https:\/\/x.com\/recantha","https:\/\/www.linkedin.com\/in\/recantha\/","https:\/\/www.youtube.com\/channel\/UCK4F9blabxzmk8Inzhs8tpg"]},{"@type":"Person","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263","name":"Michael Horne","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","caption":"Michael Horne"},"url":"https:\/\/www.recantha.co.uk\/blog\/?author=1"}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p2RsaV-11f","jetpack-related-posts":[{"id":4608,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=4608","url_meta":{"origin":3921,"position":0},"title":"Use the command line to play videos on the #RaspberryPi","author":"Michael Horne","date":"13 June 2013","format":false,"excerpt":"Matt, at Raspberry Pi Spy, has written a great little guide to using omxplayer to play videos from the command line. As he points out, this is a great way of playing videos that you've recorded from the camera module.\u00a0Read the guide","rel":"","context":"In "Camera module"","block_context":{"text":"Camera module","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=8"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":4212,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=4212","url_meta":{"origin":3921,"position":1},"title":"#RaspberryPi camera module command generator","author":"Michael Horne","date":"21 May 2013","format":false,"excerpt":"Raspberry Pi Foundation forum member Nu7s has created a web-page that will generate the command line command to make the camera do whatever you want it to.\u00a0Try it out here","rel":"","context":"In "Camera module"","block_context":{"text":"Camera module","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=8"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":11314,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=11314","url_meta":{"origin":3921,"position":2},"title":"Set-up wifi on your Raspberry Pi from the command line","author":"Michael Horne","date":"30 October 2014","format":false,"excerpt":"Richard, the Average Man, has written a straight-forward tutorial that takes you through the process of setting up wifi from the command line. Read how to do it here.","rel":"","context":"In "Networking"","block_context":{"text":"Networking","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=33"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/3.bp.blogspot.com\/-desMMbWutAI\/VFDQARDLRNI\/AAAAAAAAEVQ\/rG4cO9usYGM\/s1600\/Interfaces.PNG?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/3.bp.blogspot.com\/-desMMbWutAI\/VFDQARDLRNI\/AAAAAAAAEVQ\/rG4cO9usYGM\/s1600\/Interfaces.PNG?resize=350%2C200 1x, https:\/\/i0.wp.com\/3.bp.blogspot.com\/-desMMbWutAI\/VFDQARDLRNI\/AAAAAAAAEVQ\/rG4cO9usYGM\/s1600\/Interfaces.PNG?resize=525%2C300 1.5x"},"classes":[]},{"id":11023,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=11023","url_meta":{"origin":3921,"position":3},"title":"Display images on a Raspberry Pi from the command line","author":"Michael Horne","date":"18 September 2014","format":false,"excerpt":"Matt Hawkins has done a brief tutorial on using the software package 'fim' to display images on the command line. He's also included a nifty example of converting your image to ASCII art! Read it here.","rel":"","context":"In "Software"","block_context":{"text":"Software","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=49"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.raspberrypi-spy.co.uk\/wp-content\/uploads\/2014\/08\/fim_yoda_1.jpg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.raspberrypi-spy.co.uk\/wp-content\/uploads\/2014\/08\/fim_yoda_1.jpg?resize=350%2C200 1x, https:\/\/i0.wp.com\/www.raspberrypi-spy.co.uk\/wp-content\/uploads\/2014\/08\/fim_yoda_1.jpg?resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.raspberrypi-spy.co.uk\/wp-content\/uploads\/2014\/08\/fim_yoda_1.jpg?resize=700%2C400 2x"},"classes":[]},{"id":4484,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=4484","url_meta":{"origin":3921,"position":4},"title":"Command line audio from the #RaspberryPi","author":"Michael Horne","date":"6 June 2013","format":false,"excerpt":"Matt, over at Raspberry Pi Spy, has been experimenting with different ways of getting audio out of the Pi and through the 3.5mm jack. He explains what to install to play MP3s or WAVs.\u00a0Read his blog here","rel":"","context":"In "Music"","block_context":{"text":"Music","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=31"},"img":{"alt_text":"Raspberry Pi Command Line Audio | Raspberry Pi Spy","src":"\/blog\/wp-content\/uploads\/2013\/06\/raspberry_pi_powered_speaker_03-300x2251.jpg","width":350,"height":200},"classes":[]},{"id":12181,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=12181","url_meta":{"origin":3921,"position":5},"title":"Check your stock values on the Raspberry Pi command line","author":"Michael Horne","date":"11 March 2015","format":false,"excerpt":"Blake wanted to track his investments from the command line. He's compiled a package called 'Go' that uses the Yahoo YQL API to pull stock data from the internet. He has then written a tutorial to show you how to do all this. Read all about it here.","rel":"","context":"In "Research"","block_context":{"text":"Research","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=43"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.bitpi.co\/images\/gostock\/gostock.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.bitpi.co\/images\/gostock\/gostock.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.bitpi.co\/images\/gostock\/gostock.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/3921","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=3921"}],"version-history":[{"count":0,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/3921\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=3921"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=3921"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=3921"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}