{"id":19415,"date":"2019-03-26T10:19:35","date_gmt":"2019-03-26T09:19:35","guid":{"rendered":"https:\/\/www.recantha.co.uk\/blog\/?p=19415"},"modified":"2019-03-27T12:49:26","modified_gmt":"2019-03-27T11:49:26","slug":"make-breadboarding-your-raspberry-pi-projects-easier-with-the-breadboard-pi-bridge-a-new-crowdfunding-campaign","status":"publish","type":"post","link":"https:\/\/www.recantha.co.uk\/blog\/?p=19415","title":{"rendered":"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge – a new Crowdfunding campaign"},"content":{"rendered":"

\"\"<\/a><\/p>\n

Alex Eames, from RasPiO, has just launched his latest crowdfunding campaign over on his website<\/a>. He is hoping to fund the Breadboard Pi Bridge<\/a><\/strong> which is an easy way to bridge the gap between a Raspberry Pi and a breadboard, get solid connections and generally make your life easier. This is one of those “I wish I’d thought of that” products!<\/p>\n

The bridge sits on top of your Pi’s GPIO pins and then breaks the pins out (backwards) and then plugs into the supplied breadboard. The pins are, in typical “Alex style”, in numerical, Broadcom, order. In simple terms, this means things like GPIO Zero will “just work” as they use the Broadcom numbering system.<\/em> So, no more hunting around for the right pin. The kit (which needs to be soldered) comes with perspex plates for the bottom and to cover the Pi (if you wish) and all the fixings you need. It also comes with a selection of LEDs and resistors, and an extra wire if you want to connect up the “other” Ground rail on the breadboard. In fact, it comes with everything you see in the picture below. The only thing it doesn’t come with is the Pi itself, but I’m pretty sure you know where to go for one of them by now!<\/p>\n

\"\"<\/a><\/p>\n

It’s a really neat product, I think, and solves the problem, particularly in education (but for hobbyists, too) of connecting things up incorrectly.<\/p>\n

The Bridge costs \u00a312 plus (very reasonable) shipping, but you can get it for \u00a31 cheaper on an Earlybird basis by using the code “EARLY” at the checkout (this applies to the first 100 purchases or 24 hours after launch, whichever is reached first). There are also free gifts for multiple purchases, but I won’t go into those here – take a look at the page for details<\/a>.<\/p>\n

You can see more details and grab a Breadboard Pi Bridge here<\/a>. If you want to read a bit about the\u00a0development<\/strong> of the product, take a look at this post over at RasPi.TV<\/a>.<\/p>\n

Alex will only be putting this into production if 400 units are sold, so I hope some of you, at least, will see the benefits of it. I’ve already pledged in the hope that it will be successful.<\/em><\/p>\n","protected":false},"excerpt":{"rendered":"

Alex Eames, from RasPiO, has just launched his latest crowdfunding campaign over on his website. He is hoping to fund the Breadboard Pi Bridge which is an easy way to bridge the gap between a Raspberry Pi and a breadboard,…<\/p>\n

Read more →<\/a><\/p>\n","protected":false},"author":1,"featured_media":19416,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[13,20,47],"tags":[428,254,863],"class_list":["post-19415","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-crowdfunding","category-gpio-boards","category-rpi-shopping","tag-alex-eames","tag-raspio","tag-self-crowdfunding"],"yoast_head":"\nMake breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge - a new Crowdfunding campaign - Raspberry Pi Pod<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.recantha.co.uk\/blog\/?p=19415\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge - a new Crowdfunding campaign - Raspberry Pi Pod\" \/>\n<meta property=\"og:description\" content=\"Alex Eames, from RasPiO, has just launched his latest crowdfunding campaign over on his website. He is hoping to fund the Breadboard Pi Bridge which is an easy way to bridge the gap between a Raspberry Pi and a breadboard,…Read more →\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.recantha.co.uk\/blog\/?p=19415\" \/>\n<meta property=\"og:site_name\" content=\"Raspberry Pi Pod\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/recantha\/\" \/>\n<meta property=\"article:published_time\" content=\"2019-03-26T09:19:35+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2019-03-27T11:49:26+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/i1.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1\" \/>\n\t<meta property=\"og:image:width\" content=\"1500\" \/>\n\t<meta property=\"og:image:height\" content=\"1029\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Michael Horne\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@recantha\" \/>\n<meta name=\"twitter:site\" content=\"@recantha\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Michael Horne\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415\"},\"author\":{\"name\":\"Michael Horne\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263\"},\"headline\":\"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge – a new Crowdfunding campaign\",\"datePublished\":\"2019-03-26T09:19:35+00:00\",\"dateModified\":\"2019-03-27T11:49:26+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415\"},\"wordCount\":400,\"commentCount\":1,\"publisher\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415#primaryimage\"},\"thumbnailUrl\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1\",\"keywords\":[\"alex eames\",\"raspio\",\"self-crowdfunding\"],\"articleSection\":[\"Crowdfunding\",\"GPIO boards\",\"Shopping\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.recantha.co.uk\/blog\/?p=19415#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415\",\"name\":\"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge - a new Crowdfunding campaign - Raspberry Pi Pod\",\"isPartOf\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415#primaryimage\"},\"thumbnailUrl\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1\",\"datePublished\":\"2019-03-26T09:19:35+00:00\",\"dateModified\":\"2019-03-27T11:49:26+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.recantha.co.uk\/blog\/?p=19415\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415#primaryimage\",\"url\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1\",\"contentUrl\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1\",\"width\":1500,\"height\":1029},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=19415#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.recantha.co.uk\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge – a new Crowdfunding campaign\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#website\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/\",\"name\":\"Raspberry Pi Pod\",\"description\":\"Experiences with the Raspberry Pi micro computer and microcontroller\",\"publisher\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.recantha.co.uk\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\",\"name\":\"Raspberry Pi Pod\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"contentUrl\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"width\":800,\"height\":337,\"caption\":\"Raspberry Pi Pod\"},\"image\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/recantha\/\",\"https:\/\/x.com\/recantha\",\"https:\/\/www.linkedin.com\/in\/recantha\/\",\"https:\/\/www.youtube.com\/channel\/UCK4F9blabxzmk8Inzhs8tpg\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263\",\"name\":\"Michael Horne\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"caption\":\"Michael Horne\"},\"url\":\"https:\/\/www.recantha.co.uk\/blog\/?author=1\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge - a new Crowdfunding campaign - Raspberry Pi Pod","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.recantha.co.uk\/blog\/?p=19415","og_locale":"en_US","og_type":"article","og_title":"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge - a new Crowdfunding campaign - Raspberry Pi Pod","og_description":"Alex Eames, from RasPiO, has just launched his latest crowdfunding campaign over on his website. He is hoping to fund the Breadboard Pi Bridge which is an easy way to bridge the gap between a Raspberry Pi and a breadboard,…Read more →","og_url":"https:\/\/www.recantha.co.uk\/blog\/?p=19415","og_site_name":"Raspberry Pi Pod","article_publisher":"https:\/\/www.facebook.com\/recantha\/","article_published_time":"2019-03-26T09:19:35+00:00","article_modified_time":"2019-03-27T11:49:26+00:00","og_image":[{"width":1500,"height":1029,"url":"https:\/\/i1.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1","type":"image\/jpeg"}],"author":"Michael Horne","twitter_card":"summary_large_image","twitter_creator":"@recantha","twitter_site":"@recantha","twitter_misc":{"Written by":"Michael Horne","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415#article","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415"},"author":{"name":"Michael Horne","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263"},"headline":"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge – a new Crowdfunding campaign","datePublished":"2019-03-26T09:19:35+00:00","dateModified":"2019-03-27T11:49:26+00:00","mainEntityOfPage":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415"},"wordCount":400,"commentCount":1,"publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"image":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1","keywords":["alex eames","raspio","self-crowdfunding"],"articleSection":["Crowdfunding","GPIO boards","Shopping"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.recantha.co.uk\/blog\/?p=19415#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415","url":"https:\/\/www.recantha.co.uk\/blog\/?p=19415","name":"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge - a new Crowdfunding campaign - Raspberry Pi Pod","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415#primaryimage"},"image":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415#primaryimage"},"thumbnailUrl":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1","datePublished":"2019-03-26T09:19:35+00:00","dateModified":"2019-03-27T11:49:26+00:00","breadcrumb":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.recantha.co.uk\/blog\/?p=19415"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415#primaryimage","url":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1","width":1500,"height":1029},{"@type":"BreadcrumbList","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=19415#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.recantha.co.uk\/blog"},{"@type":"ListItem","position":2,"name":"Make breadboarding your Raspberry Pi projects easier with the Breadboard Pi Bridge – a new Crowdfunding campaign"}]},{"@type":"WebSite","@id":"https:\/\/www.recantha.co.uk\/blog\/#website","url":"https:\/\/www.recantha.co.uk\/blog\/","name":"Raspberry Pi Pod","description":"Experiences with the Raspberry Pi micro computer and microcontroller","publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.recantha.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.recantha.co.uk\/blog\/#organization","name":"Raspberry Pi Pod","url":"https:\/\/www.recantha.co.uk\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","width":800,"height":337,"caption":"Raspberry Pi Pod"},"image":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/recantha\/","https:\/\/x.com\/recantha","https:\/\/www.linkedin.com\/in\/recantha\/","https:\/\/www.youtube.com\/channel\/UCK4F9blabxzmk8Inzhs8tpg"]},{"@type":"Person","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263","name":"Michael Horne","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","caption":"Michael Horne"},"url":"https:\/\/www.recantha.co.uk\/blog\/?author=1"}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/03\/BBPi_LEDs_angled_low_cutout_1500_2048x2048.jpg?fit=1500%2C1029&ssl=1","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p2RsaV-539","jetpack-related-posts":[{"id":19433,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=19433","url_meta":{"origin":19415,"position":0},"title":"Hands-on with the Breadboard Pi Bridge from @RasPiO1 for the Raspberry Pi – an easy, very solid prototyping platform","author":"Michael Horne","date":"9 April 2019","format":false,"excerpt":"My last post was to announce Alex Eames' latest crowdfunding project, the Breadboard Pi Bridge. Now that the dust has settled slightly from Pi Wars 2019, I've had a chance to have a play with it, so I'll give you my thoughts. If you want to get hold of one,\u2026","rel":"","context":"In "Crowdfunding"","block_context":{"text":"Crowdfunding","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=13"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/04\/IMG_20190409_132225.jpg?fit=1200%2C900&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/04\/IMG_20190409_132225.jpg?fit=1200%2C900&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/04\/IMG_20190409_132225.jpg?fit=1200%2C900&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/04\/IMG_20190409_132225.jpg?fit=1200%2C900&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/04\/IMG_20190409_132225.jpg?fit=1200%2C900&ssl=1&resize=1050%2C600 3x"},"classes":[]},{"id":17806,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=17806","url_meta":{"origin":19415,"position":1},"title":"RasPiO FullpHAT – new crowdfunding campaign for the Raspberry Pi from Alex Eames","author":"Michael Horne","date":"14 November 2017","format":false,"excerpt":"Alex Eames\u00a0of RasPi.TV fame\u00a0has run several excellent crowdfunding campaigns on Kickstarter, normally delivering ahead of time and providing lots of communication along the way. His latest is for the RasPiO FullpHAT\u00a0and he's running it as a 7-day campaign from his own site. It is an add-on board for the Raspberry\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/11\/full_phat.jpg?fit=1000%2C676&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/11\/full_phat.jpg?fit=1000%2C676&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/11\/full_phat.jpg?fit=1000%2C676&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/11\/full_phat.jpg?fit=1000%2C676&ssl=1&resize=700%2C400 2x"},"classes":[]},{"id":14029,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=14029","url_meta":{"origin":19415,"position":2},"title":"Build circuits with this nifty crowdfunded Raspberry Pi HAT","author":"Michael Horne","date":"15 January 2016","format":false,"excerpt":"Alex Eames has just launched his latest Kickstarter. Following successful campaigns for the RasPiO GPIO Ruler and RasPiO Duino, he is now\u00a0raising\u00a0funds for the RasPiO Pro HAT. Key features This HAT's key features are as follows: protected GPIO ports to prevent damage to the Pi and components if you wire\u2026","rel":"","context":"In "Crowdfunding"","block_context":{"text":"Crowdfunding","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=13"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/01\/IMG_20160115_091428.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/01\/IMG_20160115_091428.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/01\/IMG_20160115_091428.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/01\/IMG_20160115_091428.jpg?resize=700%2C400&ssl=1 2x"},"classes":[]},{"id":14105,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=14105","url_meta":{"origin":19415,"position":3},"title":"RasPiO Pro Hat – new reward level launched for Raspberry Pi add-on board","author":"Michael Horne","date":"27 January 2016","format":false,"excerpt":"Alex Eames has just announced\u00a0a new reward level for his RasPiO Pro Hat Kickstarter and I just thought I'd bring it to your attention. In case you missed it, the Pro Hat is a great new plug-in board for the Raspberry Pi that breaks out all the GPIO pins to\u2026","rel":"","context":"In "Crowdfunding"","block_context":{"text":"Crowdfunding","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=13"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/ksr-ugc.imgix.net\/assets\/005\/173\/232\/f70a581c306ce0d7a02d290dbc911f6d_original.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/ksr-ugc.imgix.net\/assets\/005\/173\/232\/f70a581c306ce0d7a02d290dbc911f6d_original.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/ksr-ugc.imgix.net\/assets\/005\/173\/232\/f70a581c306ce0d7a02d290dbc911f6d_original.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":15133,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=15133","url_meta":{"origin":19415,"position":4},"title":"The MagPi reviews the RasPiO ProHAT for the Raspberry Pi","author":"Michael Horne","date":"25 July 2016","format":false,"excerpt":"In the MagPi issue 47, Phil King wrote a review of the RasPiO ProHAT. This clever prototyping HAT breaks out all the GPIO pins in numerical (BCM) order to female headers as well as adding several power and ground ports. The pins surround a mini breadboard and they are all\u2026","rel":"","context":"In "GPIO boards"","block_context":{"text":"GPIO boards","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=20"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.raspberrypi.org\/magpi\/wp-content\/uploads\/2016\/07\/RasPiO-ProHat.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.raspberrypi.org\/magpi\/wp-content\/uploads\/2016\/07\/RasPiO-ProHat.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.raspberrypi.org\/magpi\/wp-content\/uploads\/2016\/07\/RasPiO-ProHat.jpg?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/www.raspberrypi.org\/magpi\/wp-content\/uploads\/2016\/07\/RasPiO-ProHat.jpg?resize=700%2C400&ssl=1 2x, https:\/\/i0.wp.com\/www.raspberrypi.org\/magpi\/wp-content\/uploads\/2016\/07\/RasPiO-ProHat.jpg?resize=1050%2C600&ssl=1 3x, https:\/\/i0.wp.com\/www.raspberrypi.org\/magpi\/wp-content\/uploads\/2016\/07\/RasPiO-ProHat.jpg?resize=1400%2C800&ssl=1 4x"},"classes":[]},{"id":12982,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=12982","url_meta":{"origin":19415,"position":5},"title":"RasPiO GPIO ruler for Raspberry Pi announces philanthropic stretch goal","author":"Michael Horne","date":"20 July 2015","format":false,"excerpt":"Alex Eames\u00a0has announced a stretch goal for the Raspberry Pi GPIO ruler he launched on Kickstarter last week. What is the stretch goal? The target for the goal is 1000 backers or \u00a36000 and, if either of these are hit, Alex will donate 100 rulers to the Raspberry Pi Foundation.\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2015\/07\/ruler_v0_2.png?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2015\/07\/ruler_v0_2.png?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2015\/07\/ruler_v0_2.png?resize=525%2C300&ssl=1 1.5x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2015\/07\/ruler_v0_2.png?resize=700%2C400&ssl=1 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/19415","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=19415"}],"version-history":[{"count":4,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/19415\/revisions"}],"predecessor-version":[{"id":19423,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/19415\/revisions\/19423"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/media\/19416"}],"wp:attachment":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=19415"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=19415"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=19415"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}