{"id":14335,"date":"2016-03-14T11:51:40","date_gmt":"2016-03-14T10:51:40","guid":{"rendered":"http:\/\/www.recantha.co.uk\/blog\/?p=14335"},"modified":"2016-03-14T11:53:10","modified_gmt":"2016-03-14T10:53:10","slug":"voxcube-many-blinkies-controlled-by-a-raspberry-pi-in-this-8x8x8-cube-on-kickstarter","status":"publish","type":"post","link":"https:\/\/www.recantha.co.uk\/blog\/?p=14335","title":{"rendered":"VoxCube – many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter"},"content":{"rendered":"

\"45180547e90aad487087e260ec4dc2a8_original\"<\/p>\n

Mark Williams from Ozzmaker<\/a>\u00a0has been in touch about his new Kickstarter project<\/a>. Mark previously ran the successful campaign for BerryIMU – a multi-function gyro\/accelerometer sensor<\/a>\u00a0which now sits at the heart of the Picorder, my sensors-in-a-box project.<\/em><\/p>\n

The new Kickstarter is to fund the VoxCube<\/a><\/strong> (short for Voxel Cube) which is a custom-designed 8x8x8 cube full of RGB LEDs. The cubes are chainable, so you can create some\u00a0amazing<\/strong> effects (such as the wave pictured) and will be compatible, and fully controllable, with the Raspberry Pi (all models) plus Arduino and other microcontrollers. Each cube contains an\u00a0ATmega 1284P chip and is capable of producing\u00a032,767 colours.<\/p>\n

There are some absolutely\u00a0glorious<\/strong> animations featured on the Kickstarter page<\/a>, so head over there to check them out<\/a>.<\/p>\n

The VoxCube comes as a kit which requires no soldering<\/strong>\u00a0and should, according to Mark, take about 20 minutes to put together. It comes with everything you require to get it running and includes an acrylic case to turn it into a proper ‘exhibit’.<\/p>\n

Pledges which include the VoxCube start at $225 (Australian) which is about \u00a3120 including shipping. This seems expensive, but it is a\u00a0beautiful<\/em> product with a lot of potential.<\/p>\n

So, if you’re interested, head over to the Kickstarter page<\/a><\/strong>.<\/p>\n

\"d2246277b81bcc7428e4fb468f3e590e_original\"<\/p>\n","protected":false},"excerpt":{"rendered":"

Mark Williams from Ozzmaker\u00a0has been in touch about his new Kickstarter project. Mark previously ran the successful campaign for BerryIMU – a multi-function gyro\/accelerometer sensor\u00a0which now sits at the heart of the Picorder, my sensors-in-a-box project. The new Kickstarter is…<\/p>\n

Read more →<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[56,80,13,47],"tags":[],"class_list":["post-14335","post","type-post","status-publish","format-standard","hentry","category-art","category-blinkies","category-crowdfunding","category-rpi-shopping"],"yoast_head":"\nVoxCube - many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter - Raspberry Pi Pod<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.recantha.co.uk\/blog\/?p=14335\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"VoxCube - many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter - Raspberry Pi Pod\" \/>\n<meta property=\"og:description\" content=\"Mark Williams from Ozzmaker\u00a0has been in touch about his new Kickstarter project. Mark previously ran the successful campaign for BerryIMU – a multi-function gyro\/accelerometer sensor\u00a0which now sits at the heart of the Picorder, my sensors-in-a-box project. The new Kickstarter is…Read more →\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.recantha.co.uk\/blog\/?p=14335\" \/>\n<meta property=\"og:site_name\" content=\"Raspberry Pi Pod\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/recantha\/\" \/>\n<meta property=\"article:published_time\" content=\"2016-03-14T10:51:40+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2016-03-14T10:53:10+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif\" \/>\n<meta name=\"author\" content=\"Michael Horne\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@recantha\" \/>\n<meta name=\"twitter:site\" content=\"@recantha\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Michael Horne\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"1 minute\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335\"},\"author\":{\"name\":\"Michael Horne\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263\"},\"headline\":\"VoxCube – many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter\",\"datePublished\":\"2016-03-14T10:51:40+00:00\",\"dateModified\":\"2016-03-14T10:53:10+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335\"},\"wordCount\":225,\"commentCount\":1,\"publisher\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\"},\"image\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif\",\"articleSection\":[\"Art\",\"Blinkies\",\"Crowdfunding\",\"Shopping\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.recantha.co.uk\/blog\/?p=14335#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335\",\"name\":\"VoxCube - many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter - Raspberry Pi Pod\",\"isPartOf\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335#primaryimage\"},\"image\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335#primaryimage\"},\"thumbnailUrl\":\"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif\",\"datePublished\":\"2016-03-14T10:51:40+00:00\",\"dateModified\":\"2016-03-14T10:53:10+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.recantha.co.uk\/blog\/?p=14335\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335#primaryimage\",\"url\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif?fit=400%2C224&ssl=1\",\"contentUrl\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif?fit=400%2C224&ssl=1\",\"width\":400,\"height\":224},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=14335#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.recantha.co.uk\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"VoxCube – many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#website\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/\",\"name\":\"Raspberry Pi Pod\",\"description\":\"Experiences with the Raspberry Pi micro computer and microcontroller\",\"publisher\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.recantha.co.uk\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\",\"name\":\"Raspberry Pi Pod\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"contentUrl\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"width\":800,\"height\":337,\"caption\":\"Raspberry Pi Pod\"},\"image\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/recantha\/\",\"https:\/\/x.com\/recantha\",\"https:\/\/www.linkedin.com\/in\/recantha\/\",\"https:\/\/www.youtube.com\/channel\/UCK4F9blabxzmk8Inzhs8tpg\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263\",\"name\":\"Michael Horne\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"caption\":\"Michael Horne\"},\"url\":\"https:\/\/www.recantha.co.uk\/blog\/?author=1\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"VoxCube - many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter - Raspberry Pi Pod","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.recantha.co.uk\/blog\/?p=14335","og_locale":"en_US","og_type":"article","og_title":"VoxCube - many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter - Raspberry Pi Pod","og_description":"Mark Williams from Ozzmaker\u00a0has been in touch about his new Kickstarter project. Mark previously ran the successful campaign for BerryIMU – a multi-function gyro\/accelerometer sensor\u00a0which now sits at the heart of the Picorder, my sensors-in-a-box project. The new Kickstarter is…Read more →","og_url":"https:\/\/www.recantha.co.uk\/blog\/?p=14335","og_site_name":"Raspberry Pi Pod","article_publisher":"https:\/\/www.facebook.com\/recantha\/","article_published_time":"2016-03-14T10:51:40+00:00","article_modified_time":"2016-03-14T10:53:10+00:00","og_image":[{"url":"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif","type":"","width":"","height":""}],"author":"Michael Horne","twitter_card":"summary_large_image","twitter_creator":"@recantha","twitter_site":"@recantha","twitter_misc":{"Written by":"Michael Horne","Est. reading time":"1 minute"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335#article","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335"},"author":{"name":"Michael Horne","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263"},"headline":"VoxCube – many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter","datePublished":"2016-03-14T10:51:40+00:00","dateModified":"2016-03-14T10:53:10+00:00","mainEntityOfPage":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335"},"wordCount":225,"commentCount":1,"publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"image":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335#primaryimage"},"thumbnailUrl":"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif","articleSection":["Art","Blinkies","Crowdfunding","Shopping"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.recantha.co.uk\/blog\/?p=14335#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335","url":"https:\/\/www.recantha.co.uk\/blog\/?p=14335","name":"VoxCube - many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter - Raspberry Pi Pod","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335#primaryimage"},"image":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335#primaryimage"},"thumbnailUrl":"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif","datePublished":"2016-03-14T10:51:40+00:00","dateModified":"2016-03-14T10:53:10+00:00","breadcrumb":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.recantha.co.uk\/blog\/?p=14335"]}]},{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335#primaryimage","url":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif?fit=400%2C224&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/45180547e90aad487087e260ec4dc2a8_original.gif?fit=400%2C224&ssl=1","width":400,"height":224},{"@type":"BreadcrumbList","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=14335#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.recantha.co.uk\/blog"},{"@type":"ListItem","position":2,"name":"VoxCube – many blinkies controlled by a Raspberry Pi in this 8x8x8 cube on Kickstarter"}]},{"@type":"WebSite","@id":"https:\/\/www.recantha.co.uk\/blog\/#website","url":"https:\/\/www.recantha.co.uk\/blog\/","name":"Raspberry Pi Pod","description":"Experiences with the Raspberry Pi micro computer and microcontroller","publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.recantha.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.recantha.co.uk\/blog\/#organization","name":"Raspberry Pi Pod","url":"https:\/\/www.recantha.co.uk\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","width":800,"height":337,"caption":"Raspberry Pi Pod"},"image":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/recantha\/","https:\/\/x.com\/recantha","https:\/\/www.linkedin.com\/in\/recantha\/","https:\/\/www.youtube.com\/channel\/UCK4F9blabxzmk8Inzhs8tpg"]},{"@type":"Person","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263","name":"Michael Horne","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","caption":"Michael Horne"},"url":"https:\/\/www.recantha.co.uk\/blog\/?author=1"}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p2RsaV-3Jd","jetpack-related-posts":[{"id":20942,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=20942","url_meta":{"origin":14335,"position":0},"title":"Introducing the LumiCube – a Raspberry Pi-powered LED cube on Kickstarter now","author":"Michael Horne","date":"19 March 2021","format":false,"excerpt":"London-based start-up AbstractFoundry have launched their first Kickstarter for the Lumicube. It is a 10cm cube with 192 LEDs over three sides and ports etc on the back: You add your own Raspberry Pi to the cube and then use Python to control it. There are plenty of built-in apps\u2026","rel":"","context":"In "Blinkies"","block_context":{"text":"Blinkies","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=80"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2021\/03\/lumicube.jpg?fit=680%2C383&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2021\/03\/lumicube.jpg?fit=680%2C383&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2021\/03\/lumicube.jpg?fit=680%2C383&ssl=1&resize=525%2C300 1.5x"},"classes":[]},{"id":15596,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=15596","url_meta":{"origin":14335,"position":1},"title":"Kickstarter for terrific robot kit featuring Raspberry Pi, Arduino and loads of blinkies!","author":"Michael Horne","date":"29 September 2016","format":false,"excerpt":"Plum Geek have previously launched, and successfully funded a series of Arduino-powered robots on Kickstarter. Now, they've moved into the Raspberry Pi arena with the Spirit Rover. Inspired by the NASA\/JPL Mars Rover, the full kit features a custom circuit board hosting an Arduino and PIC, blinkies, a pan-and-tilt kit,\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/09\/spiritrover.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/09\/spiritrover.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/09\/spiritrover.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":11008,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=11008","url_meta":{"origin":14335,"position":2},"title":"Build a camera module project with this new Raspberry Pi prototyping board","author":"Michael Horne","date":"15 September 2014","format":false,"excerpt":"Richard Saville, aka The Average Man, has just launched his first Kickstarter campaign. The ProtoCam is a prototyping board that plugs into the Pi's GPIO pins and has a mounting space for the camera module. There are loads of different applications for this board - simply put,\u00a0anything you want to\u2026","rel":"","context":"In "Camera module"","block_context":{"text":"Camera module","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=8"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/s3.amazonaws.com\/ksr\/assets\/002\/577\/706\/b493cc65f68a1f60489c52fd60a09fc5_large.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/s3.amazonaws.com\/ksr\/assets\/002\/577\/706\/b493cc65f68a1f60489c52fd60a09fc5_large.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/s3.amazonaws.com\/ksr\/assets\/002\/577\/706\/b493cc65f68a1f60489c52fd60a09fc5_large.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":15730,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=15730","url_meta":{"origin":14335,"position":3},"title":"New Kickstarter – RGB LED Christmas decoration for the Raspberry Pi, micro:bit and CodeBug","author":"Michael Horne","date":"22 October 2016","format":false,"excerpt":"Andrew Gale previously ran a Kickstarter for a Christmas\u00a0decoration powered by the Raspberry Pi. He has now re-spun his idea and has created a decoration using RGB LEDs. It plugs directly into the GPIO pins of the Pi. He has also created a version for the micro:bit and CodeBug that\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/10\/christmastree.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/10\/christmastree.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/10\/christmastree.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":16612,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=16612","url_meta":{"origin":14335,"position":4},"title":"Lovely community profile of Alex Eames over at Raspberry Pi","author":"Michael Horne","date":"16 March 2017","format":false,"excerpt":"Raspberry Pi has published online an article from issue 52 of The MagPi. It's a community profile of my friend, Alex Eames\u00a0(that's him in the cheesy picture above!), who you probably know from RasPi.TV and RasPiO. Recently, he's launched a Kickstarter to fund RasPiO Inspiring, which is all about making\u2026","rel":"","context":"In "Blinkies"","block_context":{"text":"Blinkies","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=80"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/03\/inspiring.jpg?resize=350%2C200&ssl=1","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/03\/inspiring.jpg?resize=350%2C200&ssl=1 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/03\/inspiring.jpg?resize=525%2C300&ssl=1 1.5x"},"classes":[]},{"id":16590,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=16590","url_meta":{"origin":14335,"position":5},"title":"Make an internet clock with RasPiO Inspiring and a Raspberry Pi Zero W","author":"Michael Horne","date":"10 March 2017","format":false,"excerpt":"Alex Eames is currently running\u00a0a Kickstarter to fund his latest project - RasPiO Inspiring. As part of the campaign (which is already funded!), he has\u00a0shot a video of a project you can do with the driver board and an Inspiring\u00a0LED circle. He's placed the driver board on top of a\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/03\/ntp_clock.jpg?fit=1200%2C666&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/03\/ntp_clock.jpg?fit=1200%2C666&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/03\/ntp_clock.jpg?fit=1200%2C666&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/03\/ntp_clock.jpg?fit=1200%2C666&ssl=1&resize=700%2C400 2x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2017\/03\/ntp_clock.jpg?fit=1200%2C666&ssl=1&resize=1050%2C600 3x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/14335","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=14335"}],"version-history":[{"count":3,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/14335\/revisions"}],"predecessor-version":[{"id":14340,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/14335\/revisions\/14340"}],"wp:attachment":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=14335"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=14335"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=14335"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}