{"id":1287,"date":"2013-01-10T07:03:14","date_gmt":"2013-01-10T07:03:14","guid":{"rendered":"http:\/\/178.62.14.192\/?p=1287"},"modified":"2013-01-10T07:03:14","modified_gmt":"2013-01-10T07:03:14","slug":"modmypi-case-for-raspberrypi-review","status":"publish","type":"post","link":"https:\/\/www.recantha.co.uk\/blog\/?p=1287","title":{"rendered":"ModMyPi Case for #RaspberryPi – Review"},"content":{"rendered":"

\"red-red-raspberry-pi-case-1-498x498\"<\/a><\/p>\n

Supplier: ModMyPi<\/a>
\nPrice: \u00a32.99 – \u00a35.99 (plus delivery)<\/p>\n

Rating: 6\/10<\/strong><\/p>\n

Another case review. This is for the widely-available ModMyPi case<\/a>. I purchased two of these cases for \u00a32.99 each. They were ‘GAMBLE Mix N Match<\/a>‘ cases which means I did not know when I ordered what colours I would get.<\/p>\n

As it turns out, I received blue and red top halves and black and white bottom halves, which I was pleased with. There were slight differences between the two bottom halves – one had holes for the mount points on Rev 2 Pis, the other didn’t.<\/p>\n

These are well-made cases using good-quality plastic. I have no doubt that they provide good protection for the Pi.<\/p>\n

Below is a picture of my Blue-White combo case. Please ignore the flaky white stuff (this is polymorph which I was using to make something else and it stuck to the case).<\/p>\n

<\/div>\n

\"P1360169\"<\/p>\n

<\/div>\n

Here’s the Pi inside the bottom half of the case.
\n\"P1360168\"<\/a><\/p>\n

<\/div>\n

When placing the Pi inside the bottom half of the case, I noticed that it wasn’t a tight fit and I was hoping that the top half of the case would have kept the Pi solidly in place. However, the top doesn’t contain anything to do this and as a result the Pi does move around a fair amount (about 2mm) when shaken. This is disappointing as it means that the Pi could possibly become damaged in transit.<\/p>\n

The external ports of the Pi are all easily available and I had no problem connecting all my peripherals to it.<\/p>\n

In terms of accessing the GPIO pins, the makers of the case provide a ‘cut-out’ area above the pins. This requires cutting out some plastic ‘struts’ (as seen in the top picture above). I had to use a Dremel rotary cutter to do it properly (see my efforts below) but, because the slot is close to the side of the case, it’s difficult to do the job neatly. As you can see, my cutting job wasn’t the cleanest.<\/p>\n

\"P1360171\"<\/a><\/p>\n

<\/div>\n

Getting the ribbon cable out of the case is difficult if you don’t cut out enough of the slot and, in fact, \u00a0the area given to you to cut-out isn’t big enough. Lots of trial and errors required here. I would have been a lot happier if the slot had been covered by an easily-removable piece of plastic rather than something that needs a specialist tool to cut out!<\/p>\n

Overall, these are good cases if you want something cheap and don’t mind taking the lucky dip of the GAMBLE. I wouldn’t pay \u00a36 for one for two reasons: The loose-fitting of the Pi inside and the GPIO slot. It’s a pity as the build quality of the product is very strong.<\/p>\n

Update:\u00a0<\/strong>Later versions of the cases (such as those now on sale at ModMyPi<\/a>) have push-out sections for the GPIO and are apparently a slightly better fit. So, say 8\/10 with those modifications.<\/p>\n","protected":false},"excerpt":{"rendered":"

Supplier: ModMyPi Price: \u00a32.99 – \u00a35.99 (plus delivery) Rating: 6\/10 Another case review. This is for the widely-available ModMyPi case. I purchased two of these cases for \u00a32.99 each. They were ‘GAMBLE Mix N Match‘ cases which means I did…<\/p>\n

Read more →<\/a><\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"jetpack_post_was_ever_published":false,"_jetpack_newsletter_access":"","_jetpack_dont_email_post_to_subs":false,"_jetpack_newsletter_tier_id":0,"_jetpack_memberships_contains_paywalled_content":false,"_jetpack_memberships_contains_paid_content":false,"footnotes":"","jetpack_publicize_message":"","jetpack_publicize_feature_enabled":true,"jetpack_social_post_already_shared":true,"jetpack_social_options":{"image_generator_settings":{"template":"highway","default_image_id":0,"font":"","enabled":false},"version":2}},"categories":[54,9],"tags":[],"class_list":["post-1287","post","type-post","status-publish","format-standard","hentry","category-accessories","category-cases"],"yoast_head":"\nModMyPi Case for #RaspberryPi - Review - Raspberry Pi Pod<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.recantha.co.uk\/blog\/?p=1287\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"ModMyPi Case for #RaspberryPi - Review - Raspberry Pi Pod\" \/>\n<meta property=\"og:description\" content=\"Supplier: ModMyPi Price: \u00a32.99 – \u00a35.99 (plus delivery) Rating: 6\/10 Another case review. This is for the widely-available ModMyPi case. I purchased two of these cases for \u00a32.99 each. They were ‘GAMBLE Mix N Match‘ cases which means I did…Read more →\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.recantha.co.uk\/blog\/?p=1287\" \/>\n<meta property=\"og:site_name\" content=\"Raspberry Pi Pod\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/recantha\/\" \/>\n<meta property=\"article:published_time\" content=\"2013-01-10T07:03:14+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2013\/01\/red-red-raspberry-pi-case-1-498x4981-300x243.jpg\" \/>\n<meta name=\"author\" content=\"Michael Horne\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@recantha\" \/>\n<meta name=\"twitter:site\" content=\"@recantha\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Michael Horne\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=1287#article\",\"isPartOf\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=1287\"},\"author\":{\"name\":\"Michael Horne\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263\"},\"headline\":\"ModMyPi Case for #RaspberryPi – Review\",\"datePublished\":\"2013-01-10T07:03:14+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=1287\"},\"wordCount\":498,\"commentCount\":8,\"publisher\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\"},\"articleSection\":[\"Accessories\",\"Cases\"],\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\/\/www.recantha.co.uk\/blog\/?p=1287#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=1287\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/?p=1287\",\"name\":\"ModMyPi Case for #RaspberryPi - Review - Raspberry Pi Pod\",\"isPartOf\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#website\"},\"datePublished\":\"2013-01-10T07:03:14+00:00\",\"breadcrumb\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=1287#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.recantha.co.uk\/blog\/?p=1287\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/?p=1287#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.recantha.co.uk\/blog\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"ModMyPi Case for #RaspberryPi – Review\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#website\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/\",\"name\":\"Raspberry Pi Pod\",\"description\":\"Experiences with the Raspberry Pi micro computer and microcontroller\",\"publisher\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.recantha.co.uk\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Organization\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#organization\",\"name\":\"Raspberry Pi Pod\",\"url\":\"https:\/\/www.recantha.co.uk\/blog\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/\",\"url\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"contentUrl\":\"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1\",\"width\":800,\"height\":337,\"caption\":\"Raspberry Pi Pod\"},\"image\":{\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/\"},\"sameAs\":[\"https:\/\/www.facebook.com\/recantha\/\",\"https:\/\/x.com\/recantha\",\"https:\/\/www.linkedin.com\/in\/recantha\/\",\"https:\/\/www.youtube.com\/channel\/UCK4F9blabxzmk8Inzhs8tpg\"]},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263\",\"name\":\"Michael Horne\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g\",\"caption\":\"Michael Horne\"},\"url\":\"https:\/\/www.recantha.co.uk\/blog\/?author=1\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"ModMyPi Case for #RaspberryPi - Review - Raspberry Pi Pod","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.recantha.co.uk\/blog\/?p=1287","og_locale":"en_US","og_type":"article","og_title":"ModMyPi Case for #RaspberryPi - Review - Raspberry Pi Pod","og_description":"Supplier: ModMyPi Price: \u00a32.99 – \u00a35.99 (plus delivery) Rating: 6\/10 Another case review. This is for the widely-available ModMyPi case. I purchased two of these cases for \u00a32.99 each. They were ‘GAMBLE Mix N Match‘ cases which means I did…Read more →","og_url":"https:\/\/www.recantha.co.uk\/blog\/?p=1287","og_site_name":"Raspberry Pi Pod","article_publisher":"https:\/\/www.facebook.com\/recantha\/","article_published_time":"2013-01-10T07:03:14+00:00","og_image":[{"url":"https:\/\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2013\/01\/red-red-raspberry-pi-case-1-498x4981-300x243.jpg","type":"","width":"","height":""}],"author":"Michael Horne","twitter_card":"summary_large_image","twitter_creator":"@recantha","twitter_site":"@recantha","twitter_misc":{"Written by":"Michael Horne","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=1287#article","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=1287"},"author":{"name":"Michael Horne","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263"},"headline":"ModMyPi Case for #RaspberryPi – Review","datePublished":"2013-01-10T07:03:14+00:00","mainEntityOfPage":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=1287"},"wordCount":498,"commentCount":8,"publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"articleSection":["Accessories","Cases"],"inLanguage":"en-US","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.recantha.co.uk\/blog\/?p=1287#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=1287","url":"https:\/\/www.recantha.co.uk\/blog\/?p=1287","name":"ModMyPi Case for #RaspberryPi - Review - Raspberry Pi Pod","isPartOf":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#website"},"datePublished":"2013-01-10T07:03:14+00:00","breadcrumb":{"@id":"https:\/\/www.recantha.co.uk\/blog\/?p=1287#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.recantha.co.uk\/blog\/?p=1287"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.recantha.co.uk\/blog\/?p=1287#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.recantha.co.uk\/blog"},{"@type":"ListItem","position":2,"name":"ModMyPi Case for #RaspberryPi – Review"}]},{"@type":"WebSite","@id":"https:\/\/www.recantha.co.uk\/blog\/#website","url":"https:\/\/www.recantha.co.uk\/blog\/","name":"Raspberry Pi Pod","description":"Experiences with the Raspberry Pi micro computer and microcontroller","publisher":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.recantha.co.uk\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Organization","@id":"https:\/\/www.recantha.co.uk\/blog\/#organization","name":"Raspberry Pi Pod","url":"https:\/\/www.recantha.co.uk\/blog\/","logo":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/","url":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","contentUrl":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2016\/03\/cropped-PiPod-Logo-v3.png?fit=800%2C337&ssl=1","width":800,"height":337,"caption":"Raspberry Pi Pod"},"image":{"@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/recantha\/","https:\/\/x.com\/recantha","https:\/\/www.linkedin.com\/in\/recantha\/","https:\/\/www.youtube.com\/channel\/UCK4F9blabxzmk8Inzhs8tpg"]},{"@type":"Person","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/c27c4ef2ee1c18b130f1fcd5dcdbb263","name":"Michael Horne","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.recantha.co.uk\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/479778b0677caadde0ceb54c4129804ef674914607e3ed0998808148357d10d8?s=96&d=mm&r=g","caption":"Michael Horne"},"url":"https:\/\/www.recantha.co.uk\/blog\/?author=1"}]}},"jetpack_publicize_connections":[],"jetpack_featured_media_url":"","jetpack_sharing_enabled":true,"jetpack_shortlink":"https:\/\/wp.me\/p2RsaV-kL","jetpack-related-posts":[{"id":303,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=303","url_meta":{"origin":1287,"position":0},"title":"ModMyPi sell random cases for \u00a32.99","author":"Michael Horne","date":"22 October 2012","format":false,"excerpt":"ModMyPi are selling their hard plastic case for the Pi in random mix-n-match paired halves. They're calling it the 'Gamble'. If you don't care what colour you have, it's a great deal at just \u00a32.99 plus delivery. (No, I don't get kick-backs from them, it just seemed like a great\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"GAMBLE Mix N' Match Raspberry Pi Case","src":"\/blog\/wp-content\/uploads\/2012\/10\/gamble-raspberry-pi-case-228x2281.jpg","width":350,"height":200},"classes":[]},{"id":9635,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=9635","url_meta":{"origin":1287,"position":1},"title":"Top 5 cases for the #RaspberryPi – a different look","author":"Michael Horne","date":"13 May 2014","format":false,"excerpt":"Recently, Life Hacker published a competition to determine the best 5 cases for the Raspberry Pi. Now, obviously I'm just one person, but looking at their list I don't think they've got all the best ones. So, instead I thought I'd give an overview of my favourite cases. These aren't\u2026","rel":"","context":"In "Cases"","block_context":{"text":"Cases","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=9"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.raspberrypi.org\/wp-content\/uploads\/2012\/07\/7593886470_accb02dd4e_c.jpeg?resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.raspberrypi.org\/wp-content\/uploads\/2012\/07\/7593886470_accb02dd4e_c.jpeg?resize=350%2C200 1x, https:\/\/i0.wp.com\/www.raspberrypi.org\/wp-content\/uploads\/2012\/07\/7593886470_accb02dd4e_c.jpeg?resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.raspberrypi.org\/wp-content\/uploads\/2012\/07\/7593886470_accb02dd4e_c.jpeg?resize=700%2C400 2x"},"classes":[]},{"id":6974,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=6974","url_meta":{"origin":1287,"position":2},"title":"Review of two #RaspberryPi cases","author":"Michael Horne","date":"9 November 2013","format":false,"excerpt":"Tony Smith (a senior editor with The Register) has posted a review of two cases on his personal blog. He covers the Cyntech case and the ModMyPi case. Read here","rel":"","context":"In "Cases"","block_context":{"text":"Cases","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=9"},"img":{"alt_text":"","src":"","width":0,"height":0},"classes":[]},{"id":5184,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=5184","url_meta":{"origin":1287,"position":3},"title":"New products from Pimoroni and ModMyPi for the #RaspberryPi","author":"Michael Horne","date":"19 July 2013","format":false,"excerpt":"Just a quick round-up of some new products for the Pi. I have no affiliation to either supplier and haven't received any review products - just doing a quick summary for those who like buying bits! Gooseneck Camera Mount First up is this \u00a33.99 camera mount from ModMyPi. It plugs\u2026","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"ModMyPi | RPi Camera Board 360 Flexible Gooseneck Mount","src":"\/blog\/wp-content\/uploads\/2013\/07\/raspberry-pi-camera-mount-3-498x4981.jpg","width":350,"height":200},"classes":[]},{"id":863,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=863","url_meta":{"origin":1287,"position":4},"title":"RasPi.TV – Review of ModMyPi case","author":"Michael Horne","date":"30 November 2012","format":false,"excerpt":"Alex has done a comprehensive review of the ubiquitous (and most cost-effective) ModMyPi case over on his site. Review of ModMyPi case for the Raspberry Pi \u00bb RasPi.tv.","rel":"","context":"In "Accessories"","block_context":{"text":"Accessories","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=54"},"img":{"alt_text":"","src":"\/blog\/wp-content\/uploads\/2012\/11\/DSC_3569-1024x6801.jpg","width":350,"height":200},"classes":[]},{"id":19515,"url":"https:\/\/www.recantha.co.uk\/blog\/?p=19515","url_meta":{"origin":1287,"position":5},"title":"Raspberry Pi re-seller ModMyPi acquired by The Pi Hut","author":"Michael Horne","date":"20 June 2019","format":false,"excerpt":"Interesting news in the Pi world today. Official re-seller ModMyPi has been acquired by fellow re-seller The Pi Hut. What this means in the long term is anyone's guess, but in the official announcement on the ModMyPi website, they have stated that the entire ModMyPi product range will shortly be\u2026","rel":"","context":"In "Industry"","block_context":{"text":"Industry","link":"https:\/\/www.recantha.co.uk\/blog\/?cat=64"},"img":{"alt_text":"","src":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/06\/The-Pi-Hut.png?fit=800%2C298&ssl=1&resize=350%2C200","width":350,"height":200,"srcset":"https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/06\/The-Pi-Hut.png?fit=800%2C298&ssl=1&resize=350%2C200 1x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/06\/The-Pi-Hut.png?fit=800%2C298&ssl=1&resize=525%2C300 1.5x, https:\/\/i0.wp.com\/www.recantha.co.uk\/blog\/wp-content\/uploads\/2019\/06\/The-Pi-Hut.png?fit=800%2C298&ssl=1&resize=700%2C400 2x"},"classes":[]}],"_links":{"self":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/1287","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcomments&post=1287"}],"version-history":[{"count":0,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=\/wp\/v2\/posts\/1287\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fmedia&parent=1287"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Fcategories&post=1287"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.recantha.co.uk\/blog\/index.php?rest_route=%2Fwp%2Fv2%2Ftags&post=1287"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}