I just won a Dreamer Nano!

Dreamer Nano v4

I just won a Dreamer Nano v4.0 over at Will Garrido’s blog MobileWill! (And I never win _anything_! The last thing I won was a Space LEGO set back in the 1980s!)

The Dreamer Nano V4.0 is a surface mount breadboard embedded version of the ATMEGA 32U4 with integrated Micro USB. It has everything that Arduino Leonardo has (electrically).Physically, it is just missing power jack to save space.

Using the ATmega32U4 as its sole microcontroller allows it to be cheaper and simpler. Also, because the 32U4 is handling the USB directly, code libraries are available which allow the board to emulate a computer keyboard, mouse, and more using the USB-HID protocol!

The Dreamer Nano v4.0 is compatible with most Nano shield in the market. It’s suitable for projects that require a compact size controller system.

Specifications

  • Microcontroller:ATmega32u4
  • Operating Voltage:5V
  • Input Voltage (recommended):6.5-12v (VIN) / 5v (Micro USB)
  • Input Voltage (limits):6.5-12V
  • Digital I/O Pins:20
  • PWM Channels:7
  • Analog Input Channels:12
  • DC Current per I/O Pin:40 mA
  • DC Current for 3.3V Pin:50 mA
  • Flash Memory:32 KB (ATmega32u4) of which 4 KB used by bootloader
  • SRAM:2.5 KB (ATmega32u4)
  • EEPROM:1 KB (ATmega32u4)
  • Clock Speed:16 MHz
  • Compatible with most of Nano shield
  • Size: 45x20x20mm

This was the original competition post and this: MobileWill: 100th Post: Giveaway Winner! is the follow-up winning announcement.

Need to work out how to get it working with the Pi now… think through an Arduino would be the best bet. It is, of course, breadboard mountable, so I’ll investigate the pin-out when it arrives and see what I can do direct from the Pi.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.