Pecan Pi Relays expansion board from Nwazet for #RaspberryPi

Interesting new expansion board from US supplier Nwazet. Here is what they say about the board:

The Pecan Pi Relays kit is designed to be interfaced with the Raspberry Pi’s GPIO connector and features six normally open relays, each capable of switching up to 16A @ 250VAC. The relays are rated for at least one million cycles. The Pecan Pi Relays kit requires an external power supply capable of providing ~800mA @ 5V, such as the Nwazet Pi Power Supply, since the Raspberry Pi cannot supply enough current through its GPIO connector. The relay board can optionally power the Raspberry Pi. The kit is designed so that other boards can be chained through it. It is also easy to solder, even for a beginner.

Kit features

  • 6x 16A @ 250VAC relays
  • 6x relay ON LED
  • 2x identical Raspberry Pi GPIO connectors allowing chaining of other devices and boards
  • 1x 0.1″ external power pin header (GND, 5V)
  • 1x JST PH through-hole power connector (optional)
  • 1x 0.1″ external Raspberry Pi power pin header, allowing the Raspberry Pi to be powered through its GPIO connector (optional, jumper required)

The board is priced at a very-reasonable $22.50. Postage is obviously extra.

Nwazet – Nwazet Pecan Pi Relays

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.